Skip to the content.

Houseplant problems by plant

Care basics and the most common problems for twelve popular houseplants. Each link opens the full page with likely causes, how to tell them apart and what to do.

Monstera (Monstera deliciosa)

Monstera deliciosa is a tropical climbing aroid native to Central America. Indoors, it is grown for its large, glossy green leaves, which develop deep splits and holes as they mature; young leaves are usually whole. It grows from a sturdy stem and can climb using aerial roots. With enough light, room, and support, it is generally adaptable, though it can become large.

Problem Start here
Monstera yellow leaves: causes and what to check On Monstera, several yellow leaves often point to potting mix staying wet too long, especially when drainage or light is limited. First feel the mix below the surface and check whether the pot drains freely.
Monstera brown leaf tips and edges: causes and what to check On Monstera deliciosa, brown tips and edges often follow a root ball that has become too dry or repeated fertilizer salts. Feel the mix below the surface and review recent feeding before changing humidity.
Monstera leaves curling: causes and what to check On Monstera, curling often follows a mix that has become too dry, though pests and root stress can look similar. First inspect the newest leaves and their undersides, then feel the mix before changing watering.
Monstera brown or black spots: causes and what to check On Monstera deliciosa, brown or black spots are often linked to direct sun on leaves or potting mix that stays wet. First check whether the spots are dry or wet, and feel the mix before changing care.
Monstera root rot: causes and what to check Root trouble in Monstera often follows potting mix that stays wet and short of air. First feel the mix and check that excess water can drain; if it is wet and the plant wilts, inspect roots for softness.

Pothos (Epipremnum aureum)

Pothos (Epipremnum aureum) has glossy, heart-shaped leaves on long, trailing vines. Leaves are often green with yellow or cream markings, though patterns vary with cultivar and growing conditions. It is native to the Society Islands of French Polynesia. Indoors, it is a forgiving tropical plant that adapts to a range of conditions, though steady care supports fuller growth.

Problem Start here
Pothos yellow leaves: causes and what to check Several yellow leaves on pothos often point to potting mix staying wet too long, especially in a pot with poor drainage. Feel the mix below the surface first, then check that the pot can drain freely.
Pothos brown leaf tips and edges: causes and what to check On pothos, brown tips often follow a root ball that has dried too far or repeated wet-dry swings; fertilizer salts can also contribute. Feel the mix below the surface and check for a crust before changing humidity.
Pothos wilting: causes and what to check A dry potting mix is a common reason pothos wilts, especially when the pot feels light. Check moisture below the surface before watering, since soggy mix and poor drainage can also leave the leaves limp.
Pothos root rot: causes and what to check Pothos root rot is often linked to potting mix that stays wet and poorly aerated. First feel the mix and lift the pot; if it is wet and the plant wilts, check whether roots are firm or mushy.
Pothos cottony clumps: causes and what to check On pothos, cottony clumps are often mealybugs hiding at leaf joints or along stems. First inspect those spots and the undersides of leaves for oval insects, sticky residue, or clumps that return after wiping.

Snake plant (Dracaena trifasciata)

Snake plant, now classified as Dracaena trifasciata, has stiff, upright, sword-shaped leaves, often marked with gray-green bands and edged in yellow in some varieties. It is native to tropical West Africa. Indoors it is a slow-growing, adaptable plant that tolerates lower light and missed watering better than constantly wet soil.

Problem Start here
Snake plant yellow leaves: causes and what to check For snake plants, several yellow leaves are often linked to potting mix that stays wet, especially in a pot with poor drainage. Feel the mix below the surface and check whether the pot drains freely before watering again.
Snake plant root rot: causes and what to check Root rot in snake plants is often linked to mix that stays wet too long. Before changing care, feel the mix and check whether the leaf bases or roots are soft, rather than judging by root color alone.
Snake plant leaves curling: causes and what to check On snake plants, curled leaves often follow a very dry mix, though damaged roots can also limit water uptake. Check the newest leaves and their undersides for pests, then feel the mix before changing care.
Snake plant brown tips and edges: causes and what to check On snake plants, brown tips often follow a very dry root ball or fertilizer salt buildup, while soggy roots can also cause stress. Feel the mix below the surface and look for crust before changing care.
Snake plant wilting: causes and what to check Snake plants store water in their thick leaves, so wilting is often linked to roots staying wet too long rather than a need for frequent watering. Feel the mix below the surface and check whether the pot drains freely.

Fiddle leaf fig (Ficus lyrata)

Fiddle leaf fig (Ficus lyrata) is an upright, woody houseplant with large, glossy, violin-shaped leaves and prominent veins. It is native to tropical western Africa, where it grows as a tree. Indoors, it can become a striking focal plant, but it often responds to changes in light, temperature, or watering by dropping leaves.

Problem Start here
Fiddle leaf fig brown or black spots: causes and what to check On fiddle leaf figs, dark spots often follow potting mix that stays wet too long and stressed roots. First feel the mix several centimetres down, lift the pot, and check whether spots are dry or spreading.
Fiddle leaf fig yellow leaves: causes and what to check On fiddle leaf figs, several yellow leaves often point to potting mix staying too wet and roots losing air. First feel the mix below the surface, lift the pot, and check that water can drain freely.
Fiddle leaf fig wilting: causes and what to check For a fiddle leaf fig, wilting often follows a potting mix that has become too dry, though waterlogged roots can look similar. Feel the mix below the surface and lift the pot before deciding whether to water.
Fiddle leaf fig brown tips and edges: causes and what to check On fiddle leaf figs, brown tips and margins often follow uneven soil moisture or roots staying too wet; fertilizer salt buildup can also contribute. Feel the mix below the surface before changing humidity.
Fiddle leaf fig speckled leaves: causes and what to check Fine pale stippling on fiddle leaf fig leaves is often caused by spider mites, especially in warm, dry indoor air. First inspect leaf undersides with a magnifier and tap a leaf over white paper for moving dots.

Peace lily (Spathiphyllum)

Peace lilies (Spathiphyllum) are tropical foliage plants with upright clumps of glossy, lance-shaped leaves and occasional white flower-like spathes surrounding a central spadix. They come from tropical regions of Central and South America, where they grow beneath forest canopies. Indoors, they usually adapt well to steady warmth and indirect light, though flowering varies with conditions.

Problem Start here
Peace lily wilting: causes and what to check Peace lilies often wilt when their potting mix has become too dry, and they may perk up after a thorough drink. First feel the mix below the surface and lift the pot; a wet, heavy pot calls for a different response.
Peace lily brown leaf tips and edges: causes and what to check Peace lily leaf edges often brown after the root ball dries too far, stays waterlogged, or accumulates fertilizer salts. First feel the mix below the surface and check for a crust or standing water before changing humidity.
Peace lily yellow leaves: causes and what to check Several yellow leaves on a peace lily often point to potting mix that stays too wet, especially if the pot drains poorly. Feel the mix below the surface and check that excess water can leave the pot.
Peace lily brown or black spots: causes and what to check On peace lilies, dry brown patches are often leaf scorch after exposure to direct sun. Check both sides of the leaves and feel the spots: dry, stable marks differ from wet-looking spots that enlarge or appear on new leaves.
Peace lily fungus gnats: causes and what to check Little black flies around a peace lily often come from fungus gnat larvae in persistently damp potting mix. First check whether adults rise from the soil when you water or disturb the pot.

Spider plant (Chlorophytum comosum)

Spider plant (Chlorophytum comosum) is a popular houseplant with arching, strap-shaped leaves, often striped green and white. It is native to tropical and southern Africa. Mature plants send out long stems bearing small flowers and baby plantlets. It is generally adaptable indoors, though steady growth depends on suitable light and watering.

Problem Start here
Spider plant brown tips and edges: causes and what to check Mineral salts from tap water or repeated feeding often cause brown tips on spider plants. First feel the mix below the surface and look for a crust on the potting mix, then consider the water and fertilizer used.
Spider plant yellow leaves: causes and what to check Several yellowing leaves often point to roots staying too wet, especially in a pot that drains poorly. Feel the mix below the surface and check whether water can drain freely before watering again.
Spider plant wilting: causes and what to check Spider plants often wilt when their potting mix has dried too far, but soggy roots can also limit water uptake. First feel the mix several centimetres down and lift the pot.
Spider plant root-bound: causes and what to check Spider plants grow quickly and can fill a small pot, but a root at the drain hole alone does not mean they need repotting. Slide out the root ball and check for circling roots and little potting mix.
Spider plant curling leaves: causes and what to check Spider plant leaves often curl when the root ball is too dry, though soggy roots, pests, or abrupt heat and light changes can also distort growth. First feel the mix below the surface and inspect leaf undersides.

ZZ plant (Zamioculcas zamiifolia)

The ZZ plant has thick, upright stems lined with glossy, oval leaflets, giving it a tidy, architectural look. It is native to eastern Africa, where it grows in seasonally dry conditions. Indoors, it is usually slow-growing and forgiving of missed watering, but it can decline if its roots stay wet for long periods.

Problem Start here
ZZ plant yellow leaves: causes and what to check Several yellowing stems often point to potting mix staying wet too long, which can damage the ZZ plant’s rhizomes and roots. First feel the mix below the surface and check drainage.
ZZ plant root rot: causes and what to check ZZ plants store water in thick rhizomes and can stay wet too long, so excess watering is a common trigger for root rot. First, feel the mix and inspect roots for softness, not just dark color.
ZZ plant wilting: causes and what to check On a ZZ plant, wilting often follows overly wet mix and struggling roots or rhizomes, though prolonged dryness can also droop stems. First, feel deep in the mix and lift the pot before adding water.
ZZ plant brown tips and edges: causes and what to check On a ZZ plant, brown tips or edges often follow a very dry root ball or fertilizer salt buildup. Check moisture below the surface and any recent feeding before changing humidity, which this plant usually tolerates well.

Rubber plant (Ficus elastica)

The rubber plant is an evergreen with large, thick, glossy leaves on an upright stem. It is native to parts of South and Southeast Asia, where it grows as a tree. Indoors, it can become a substantial floor plant, but usually grows at a manageable pace. It does best with steady conditions and room for its leaves.

Problem Start here
Rubber plant yellow leaves: causes and what to check Several yellow leaves on a rubber plant often point to potting mix staying wet too long, especially in low light. First feel the mix a few centimetres down and check that the pot drains freely.
Rubber plant wilting: causes and what to check For a rubber plant, wilting often follows dry potting mix, but waterlogged roots can cause similar drooping. First feel the mix several centimetres down and lift the pot before deciding whether to water.
Rubber plant brown or black spots: causes and what to check On rubber plants, dark spots often follow a mix kept too wet or prolonged moisture around leaves, though scorch and cold injury can look similar. First check whether the spots are dry or wet and whether the potting mix is still damp.
Rubber plant leaves curling: causes and what to check On a rubber plant, leaves often curl when the root ball has become too dry, though pests or wet, stressed roots can look similar. First inspect new leaves and their undersides, then feel the mix below the surface.
Rubber plant hard bumps: causes and what to check On rubber plants, separate, firmly attached bumps along woody stems are often scale insects. Check whether each bump lifts from the surface, and look for sticky residue under leaves or near stem joints before removing anything.

Calathea (Goeppertia (formerly Calathea))

Calatheas, many now classified as Goeppertia, are grown for patterned leaves that may be striped, spotted, or colored beneath. They come from tropical regions of the Americas, where many grow on the shaded forest floor. Indoors, they prefer steady warmth, gentle light, and evenly moist conditions. Their leaves can react visibly to changes in light and moisture, so observe new growth as well as older leaves.

Problem Start here
Calathea brown tips and edges: causes and what to check Brown tips on Calathea leaves often follow uneven moisture or mineral and fertilizer salts, though dry air and drafts can contribute. First feel the mix below the surface and inspect for crust.
Calathea curling leaves: causes and what to check Calathea leaves often curl when they lose water faster than the roots can replace it, commonly because the mix is too dry or the air is hot and dry. Check the leaf undersides and potting mix first.
Calathea yellow leaves: causes and what to check Several yellowing leaves on a Calathea often point to roots staying too wet, especially in a dense mix or pot without free drainage. First feel the mix below the surface and check whether the pot drains.
Calathea speckled leaves: causes and what to check Fine pale speckles on Calathea leaves are often caused by spider mites, which can be hard to see. Check the undersides for moving dots and fine webbing before changing care.
Calathea wilting: causes and what to check Calatheas often wilt when their roots have too little available water, but persistently wet mix can also cause drooping. First feel several centimetres below the surface and lift the pot.

Heartleaf philodendron (Philodendron hederaceum)

Heartleaf philodendron (Philodendron hederaceum) is a tropical evergreen vine with slender stems and glossy, heart-shaped leaves. Native to tropical regions of the Americas, it grows as a climbing plant in nature. Indoors, it is usually adaptable and easy to grow, though its stems can become sparse in dim light.

Problem Start here
Heartleaf philodendron yellow leaves: causes and what to check Several yellow leaves on a heartleaf philodendron often point to potting mix staying wet too long, especially in a poorly draining pot. First feel the mix below the surface and check drainage.
Heartleaf philodendron brown tips: causes and what to check On heartleaf philodendron, brown tips and edges often follow a root ball that has dried too far or watering that swings between very dry and wet. Feel the mix below the surface first.
Heartleaf philodendron wilting: causes and what to check A dry potting mix is a common reason a heartleaf philodendron wilts. Feel the mix below the surface and lift the pot before watering; a light pot with dry mix often points to thirst.
Heartleaf philodendron leaf spots: causes and what to check On heartleaf philodendron, a dry brown patch is often sun scorch after exposure to direct light. First inspect both leaf surfaces and compare the spot’s texture and spread, then check whether the plant was recently moved closer to a bright window.
Heartleaf philodendron root rot: causes and what to check Heartleaf philodendron root problems often follow potting mix that stays wet too long. First, feel the mix below the surface and check that excess water can drain, then inspect roots for softness rather than relying on color.

Aloe vera (Aloe vera)

Aloe vera is a stemless succulent with a rosette of thick, pointed green leaves and small teeth along their edges. It is native to the Arabian Peninsula and is widely grown indoors for its sculptural form. It is generally resilient, but needs strong light and potting mix that drains freely.

Problem Start here
Aloe vera yellow leaves: causes and what to check Aloe vera leaves most often turn yellow when the potting mix stays wet and roots are stressed. First feel the mix several centimetres down, check that the pot drains freely, and see whether yellowing is limited to one old lower leaf.
Aloe vera brown tips and edges: causes and what to check Brown tips and edges on Aloe vera often follow a watering mismatch, such as a root ball staying dry too long. Feel the mix below the surface and lift the pot before watering; also check for recent feeding or a crust on the soil.
Aloe vera root rot: causes and what to check Aloe vera root problems often follow mix that stays wet, especially when drainage is poor. First feel the mix and check whether the roots are firm or soft and breaking apart; color alone is not enough.
Aloe vera pale patches after sun: causes and what to check A sudden move from lower light into strong direct sun is the most likely cause. Aloe leaves can bleach and dry where exposed. First check whether patches are on the sun-facing side and feel dry, not wet.
Aloe vera wilting: causes and what to check Aloe vera often wilts when its roots stay wet and lose function, though a very dry mix can also make leaves droop. Feel the mix below the surface and lift the pot before watering.

Moth orchid (Phalaenopsis)

Moth orchids are popular houseplants with broad, leathery leaves, exposed silvery roots, and arching stems of rounded flowers. Phalaenopsis species come from tropical parts of Asia and nearby islands, where many grow on trees rather than in soil. Indoors, they are usually steady growers when given warmth, gentle light, and an airy root zone.

Problem Start here
Moth orchid yellow leaves: causes and what to check A single oldest leaf often yellows as a moth orchid replaces older foliage. First check whether it is a lower leaf and whether newer leaves remain firm and green; several yellow leaves call for checking roots, light, and pests.
Moth orchid root rot: causes and what to check On moth orchids, roots that stay wet in dense or poorly drained mix are a common reason for rot. First feel accessible roots: firmness matters more than color; mushiness is a stronger clue.
Moth orchid wilting: causes and what to check For a moth orchid, limp or wrinkled leaves often mean its roots are not taking up enough water, either because the mix has dried or roots have been damaged by staying wet. First feel the mix and lift the pot.
Moth orchid brown or black spots: causes and what to check On moth orchids, a dry brown patch is often sun scorch after exposure to stronger light. Wet, enlarging spots need closer attention. First inspect both leaf surfaces and note whether the tissue is dry or soft, and whether marks are spreading.
Moth orchid cottony clumps: causes and what to check On a moth orchid, distinct white cottony clusters in leaf joints, along the flower spike, or under leaves are often mealybugs. First inspect these sheltered spots for small oval insects and sticky residue, then separate the orchid from nearby plants.